Two-stage heat pump, 1962 ranch
Electric strip heat out, variable-speed heat pump in, and a return duct finally sized for the house it serves.
- System
- Variable-speed heat pump
- On site
- 2 days
Projects
Eight jobs, with the numbers left in.
Every one of these started as a symptom, not a sale. The spec line under each photo is what we actually measured or installed — not marketing copy.
The bonus room that was never comfortable
A single ductless head above the door solved a room that three previous companies had tried to fix with dampers.
- System
- Single-zone ductless
- On site
- 1 day
Whole-house airflow rebalance
Static pressure was more than double the equipment spec. New return trunk, two branches resized, dampers set and measured.
- Static before
- 0.98 in. w.c.
- After
- 0.52 in. w.c.
Ceiling diffusers, new build
Register placement planned with the builder so no supply blows across a ceiling fan or straight at a sofa.
- Supplies
- 14
- Returns
- 3
Dual-fuel changeout before winter
Heat pump above 35°F, existing gas furnace below it, with the changeover point set from the customer’s own utility rates.
- Setup
- Dual fuel
- On site
- 1 day
Media filtration without choking the system
A five-inch cabinet sized to the airflow, replacing a one-inch high-MERV filter that was starving the blower.
- Filter
- 5 in. media
- Pressure drop
- Down 41%
Zoning a split-level that never agreed with itself
Two zones, motorized dampers and remote sensors in the rooms people actually sleep in.
- Zones
- 2
- Sensors
- 4
Attic runs, insulated and sealed
Twelve feet of crushed flex replaced with hard pipe, joints mastic-sealed, everything above the insulation line wrapped.
- Leakage
- Down 62%
- On site
- 1 day
The next write-up on this page could be your house.
Tell us what the system is doing and we will tell you what a visit involves.